electronic belt controller 57/75/90 mm
In stock
SKU
14010104EN
The MBT-ng is a portable measuring tool for checking and adjusting the tension of tension corded flat belts
SODIMAS lifts. It allows to visualize the tension during the adjustment of the belt and the compression of the
belt tensioner springs. Use is recommended to check belt tension or anomaly
observed on the voltage system. It is powered by a 3.7V 1400MAH LI-PO rechargeable battery with function
automatic shutdown.
Connection to computer via USB cable or WIFI. Allowing
to obtain a .pdf file containing a report of the tests and installation adjustments.
IP51
The MBT must be recalibrated every 2 years. To carry out this maintenance, contact the service
SODIMAS sales representative.
For device type XS / VSPACE / VM M / VM Speed / VM Be / VM XXL be 3 / SMALL / MEDIUM / EOL
SODIMAS lifts. It allows to visualize the tension during the adjustment of the belt and the compression of the
belt tensioner springs. Use is recommended to check belt tension or anomaly
observed on the voltage system. It is powered by a 3.7V 1400MAH LI-PO rechargeable battery with function
automatic shutdown.
Connection to computer via USB cable or WIFI. Allowing
to obtain a .pdf file containing a report of the tests and installation adjustments.
IP51
The MBT must be recalibrated every 2 years. To carry out this maintenance, contact the service
SODIMAS sales representative.
For device type XS / VSPACE / VM M / VM Speed / VM Be / VM XXL be 3 / SMALL / MEDIUM / EOL
| Manufacturer | Dinacell |
|---|---|
| Parcel net weight | 4 KG |
| Parcel gross weight | 4 KG |
